Protocol for applying BioVam to Quaking Aspen Trees

Note:  This protocol applies to all trees.

When BioVam Mycorrhiza is applied to a Quaking Aspen tree, the health of the tree is increased. This is reflected in healthier leaf surface tissues, which can resist the intrusion of Black Leaf fungi, which often infect Aspen trees.

Existing Plant Procedure: Measure the diameter of the drip line in inches, multiply by 3.1416 and divide by 8 inches. The result is the number of holes 8 inches apart that must be made in the drip line.  Use a probe to make each hole about 6-8 inches deep into the soil around the drip line.  Put 1 teaspoon of BioVam into each hole and cover with soil.  Each year, apply three cups of Biosol Forte 7-2-1 Organic fertilizer around the drip line of the plant.  If the soil is bare, mix into surface of soil

New Plantings: Put one tablespoon of BioVam on the roots of the Aspen tree when planting new trees. Mix one cup of Biosol Forte 7-2-1 Organic fertilizer in ground around the plant.

Caution: Avoid the use of phosphate fertilizers that have a phosphorus rating above 2% over the drip line of the Aspen trees treated with BioVam.  Avoid use of fungicides on trees treated with BioVam.

One quart of BioVam contains 192 teaspoons of product.   There is enough in a quart to do 6.8 trees of the size shown in the above illustration.